Desktop SJ35 extruder, pelletizer, granulating line
Desktop SJ35 Extruder
SJ35-Desket is part number for the Desktop Extruder
G-Pelletizer filament cutting into pellet machine
SJ35-GL is a granulating production line that includes the SJ35-Desket Extruder, water-cooling tank, and the G-Pelletizer.
SJ35Line is a filament production line that includes an SJ35-Desket Extruder, water cooling tank, Tractor (it's different from GL-Tractor), Spooling Unit (Arrangement and Metering). The filament diameter measuring unit (Laser Gauge?) is Not included.
SJ35 extruder for 3d printing filament or granulating line in laboratory or institute.
Desktop type 35mm diameter extrusion screw and 12:1 length diameter ratio which is 400mm effective working length.
Desktop Filament Production Line
Filament production line (in the video, the laser gauge are separately available)
Desktop granulating or pelletizing line
Water cooling tank
Pelletizer or granulator
SJ35-Desket is only the SJ35 extruder on the very left.
G-Pelletizer is a machine used to cut the filament into pellets, tractor function built-in (there is No need for an extra filament tractor).
SJ35-GL is the whole above 3 parts and the water cooling tank you can find in the picture.
Desktop Tubing Extrusion Product Line
With an add-on Tubing DIE, the SJ35 Desktop Extruder can be used for tubing extrusion size below 10mm.
More readings on the Desktop SJ35 Extruder
With the G-Pelletizer, you do Not need a separate Tractor for the filament traction.
Parameters of desktop pelletizer:
Voltage: 220v (110V optional)
Speed: 0-100 RPM adjustable
Control method: frequency convertor speed regulation /VFD
Length, width, and height: 500*500*450mm
SJ35-Desket-H high-temperature extruder up to 500C, Servo Motor
PET Recycling Practical Notice:
The SJ35Line filament production line can be used for PET Recycling. About the tolerance, it's practical to adjust the speed of the extruder and the tractor, because the extruder and the tractor do not have a synchronously controlling system. Our practical tolerance could be +-0.05mm.
1. Make sure the temperature of the screw and barrel zone reaching the melt for the PET and then to start the Extruder. Temperature does Not reach may cause the extruder, especially the motor getting hot, also the screw is easily worn out.
2. You need a hot water supply in the cooling tank, to keep it 60-70 centi-degree would be good, we use an induction cooker to keep warm. :-)
3. Keep the extruder and the water tank as close as possible, then the filament can be cooled down ASAP.
4. The temperature of the DIE (Nozzle) as lower as the extrusion can be extruded out.
5. Make sure the filament between the extruder and the tractor tightly and submarine the hot water in the cooling tank.
SJ35-S410UoI 35mm diameter plastic screw designed by University of Idaho ME Department for the SJ35 Extruder
Twin Screw Anti-bridging Force Feeder$960.00anti-bridging feeder,twin screw feeder,loss in weight feeder,force feeder,extruder feeder
High speed mixer and dryer for plastic, rubber pellets$2360.00high speed mixer,SHR-10A,SHR-5A,mixer,mixing machine
Shrink Tube, Cable Hose Cutter automatic wire cable tube cutting machine$1196.00tube cutter,tubing cutter,cable hose cutter,pipe cutting machine,tube cutting machine,increment cutter
D30, D35 LD ratio 28 screw, barrel with mixing and shearing sections$540.00extrusion screw,injection molding screw,extruder screw
Spray machine pneumatic or hydraulic for high pressure PU polyurethane foaming or paint$3680.00foam spray machine,pu foam spray,foam sprayer,paint sprayer,high pressure spraying machine
20Khz Ultrasonic Plastic Welding Machine Plastic Welders$2300.00plastic welding,ultrasonic welding,plastic welding machine,ultrasonic plastic welder
Desktop pelletizer, crusher, shredder for plastic recycling or polymer experiment$1680.00desktop crusher,desktop pelletizer,plastic recycling,plastic pelletizing,desktop shredder,benchtop shredder,benchtop crusher
Servo motor fly-knife rotary cutter for plastic extrusion$2590.00fly-knife cutter,fly-knife rotary cutter,cross rotary cutter,biofilter media cutter,fly-knife cutting machine,fly cutter